Making your own facial moisturizer isn’t difficult, and it can save you a lot of money. Learn to make a homemade moisturizer for oily, acne prone skin, and customize it to suit your skin.

For the last 30 years or so, I’ve struggled with oily, acne prone skin. When I was 13 years old, it wasn’t that unusual. I could blame it on the hormonal changes of adolescence. When I hit 20, I was excited that it was finally time for my skin to clear up, but it didn’t; nor did it when I hit 30, or 40!
To be honest, I’ve always avoided wearing any type of facial moisturizer because I was afraid that it would make my skin break out more than it already was.
As I’ve gotten older, though, I have new concerns. I want to use some sort of moisturizer to prevent age lines and wrinkles. While my homemade hyaluronic acid serum does seem to work quite well to help my skin stay youthful, I wanted to make myself a moisturizer to use with my serum.
Why make your own moisturizer?
Making your own moisturizer may sound intimidating, but it’s actually very easy. If you can bake a cake or make aioli, you should have no issues making your own lotions and moisturizers.
Of course, just because you can do something, doesn’t always mean you should. In this case, though, there are many benefits to making your own facial moisturizer.
Customize it to suit your skin
In this article, I’ll be sharing some of my favorite oils and other ingredients for oily and acne prone skin. These oils have worked well for me, and I think they are a great starting point for making your own moisturizer if you have acne prone skin.
While non-comedogenic oils are generally less problematic for most people with acne-prone skin, not all non-comedogenic oils work well for all people. Some people may have sensitivities to certain oils. Being able to customize a moisturizer to suit your needs can be life-changing for people with sensitive skin.
It’s not just about the oils, though. You can also avoid perfumes, parabens, and other problematic ingredients.
Save money
Not only do you gain the ability to choose what goes into your moisturizer, but you can also save money. Moisturizers tend to be quite expensive despite the fact that normally over 50% of the product is water! Once you’ve invested in a good emulsifier and preservative, you can use it for multiple batches of moisturizers and other products.
Ingredients
A moisturizer has 4 basic ingredients: oils, water, and emulsifier, and a preservative.
I have decided to use a variety of oils to add a variety of skin benefits to this moisturizer. That said, you could simplify the recipe, using only one or two of the oils that I have used.
I have also added rose water as part of the water phase of the recipe for its lovely fragrance and its skin-soothing properties. Feel free to only use water, though. You can always add some essential oils for fragrance when you add in the preservative.

The best oils for oily and acne prone skin
After a bit of research, I realized that not all oils will cause breakouts. Nor will they all make your skin feel oily. In fact, some oils can actually help balance the oils in your skin. That makes them beneficial for someone like me with oily or combination skin.
When making your own homemade moisturizer, it’s important to use the best oils for your skin type! Today, I’ll cover some non-comedogenic oils that I use in my homemade moisturizer.
While you can use my recipe as written, you can use your own combination of oils. (Just make sure to keep the total oil weight the same.)
Hemp seed oil
Hemp seed oil may be my favorite oil for people with oily and/or acne prone skin!
Not only does it have a comedogenic rating of ZERO, but it is known to help balance the oils in your skin. It may also help clear up blackheads and small pimples. It does all of that while helping reduce dry patches, inflammation, redness, and fine lines!
It’s a definite must have in any homemade lotion for oily and acne prone skin.
Hemp seed oil Argan oil
You may notice that in some of my photos, my homemade moisturizer is a bright white color. In others, it’s more of a pale yellow. This is due to using different hemp oils from different suppliers. When using a light-colored hemp oil, the moisturizer is very light in color or even bright white. When using a dark green hemp oil, the moisturizer is darker in color.
Some hemp oils may also add a scent that can be overpowering, so keep that in mind. (Oils with less scent and less color probably make a prettier, more pleasant moisturizer, but either type will work.)
Argan oil
Argan oil was already one of my favorite oils for both skin and hair, but I love it even more knowing that it also has a comedogenic rating of ZERO. In fact, it may even directly inhibit the bacteria that cause acne, making it a possible acne treatment!
The great thing about argan oil is that, because it helps balance the sebum production of the skin, it is a great oil to use on any skin type. It hydrates and works great on flaking or itchy dry skin. It is normally very well tolerated by people with sensitive skin, and it may help eczema, rosacea, or psoriasis.
Because it helps balance the sebum production of your skin, it’s especially great for moisturizing oily or combination skin.
Sunflower oil
I was very surprised to find that sunflower oil is another oil with a comedogenic rating of ZERO!
There is a catch, though. You shouldn’t use sunflower oil with a high oleic content which may clog pores. Sunflower oil that doesn’t specifically say it is high oleic should be fine. (High oleic sunflower oil is made from sunflowers that have been crossbred to be high in oleic acid in an attempt to prolong their shelf life and make them healthier for eating.)
Otherwise, sunflower oil may be the best oil to use on acne-prone skin because it is the highest, of the oils with a comedogenic rating of zero, in linoleic acid. People who are acne-prone tend to have lower levels of linoleic acid in their skin, and it is generally thought that oils high in linoleic acid will help problems with acne.
Sunflower oil has also been shown to hydrate the skin better than olive oil, and it also may provide a barrier against the bacteria that could cause acne and other infections.
Sunflower oil Shea butter
Shea butter
Shea butter is another one of those surprising oils. Because it’s so thick, you’d probably imagine it would cause your skin to break out. Interestingly enough, though, it also has a comedogenic rating of zero!
An amazing emollient, shea butter has demonstrated anti-inflammatory and anti-aging properties. It also naturally blocks some UVB rays, making it a useful addition to day creams.
If your skin is very oily, shea butter may feel slightly heavy for your skin. That’s why I use it in a low concentration. It adds its anti-aging benefits without feeling too heavy.
Unrefined shea butter also has a scent that many people find overpowering and unpleasant. Keep that in mind when choosing which type of shea butter you’d like to use.
Some people (not all) with a latex allergy may also react to shea butter. If you are in doubt, sub out the shea butter for a different oil in the recipe!
Rosehip oil
Rosehip oil is great for helping combat the redness and inflammation from acne. It has antioxidant qualities and is a good source of phytonutrients.
I was first introduced to rosehip oil when my husband was badly burned in an accident on his fishing boat. During the rehabilitation phase, the doctors prescribed massaging rosehip oil into the scars daily. They told us that rosehip oil and massage could help reduce the thickness of the scars, allowing for mobility in the scarred areas of skin.
It’s not just useful for acne and scars, though. Rosehip oil may help with a variety of skin conditions. It may help reduce fine lines and wrinkles, scarring, and skin discolorations like age spots. It may also help improve eczema, psoriasis, and stretch marks.
With all of its potential benefits, rosehip oil makes a great addition to a homemade moisturizer for acne-prone skin!
Unlike the other oils listed, rosehip oil has a comedogenic rating of 1. That is still a very low rating and most people react well to it.
Some people with acne use rosehip oil on alternate days and find that it helps them when used in that way. I added it in a low percentage to the moisturizer recipe, just in case. It works well for me. If you have issues with rosehip oil, though, sub it out for a different oil!
Rosehip oil Rose water
The water phase
While this moisturizer can be made with only distilled water, I combined the water with rose water. Rose water adds a lovely floral fragrance to the moisturizer, additional moisturizing and anti-aging properties, and it can help fight acne and eczema. Its antioxidant and anti-inflammatory properties may protect cells from damage. It may also help heal wounds and clear up scars!
My homemade rose hydrosol didn’t have as potent of a fragrance as the store-bought rose water sold for use in foods. So, the last time I made this moisturizer, I actually combined the two. I had an abundance of homemade rose hydrosol, so I used that in place of the distilled water. I then used the food grade rose water for the rose water in the recipe below.
While I normally add essential oils to my lotions and creams, the rose water left this facial cream with such a lovely fragrance that I didn’t choose to add any. If you have moderate to more severe acne, though, you may want to consider adding some tea tree essential oil to your cream.
Choosing an emulsifier
Because this is a recipe for acne-prone skin, I chose to use an emulsifier that is known to be non-comedogenic, Montanov 68. It’s an emulsifier that is made from tapioca and coconut oil. It gave my cream a light, yet thick, texture that goes on wonderfully. It makes my skin feel nice and smooth.
Some readers have commented that it is harder to find Montanov 68 in the United States, so I have researched other emulsifiers. (Check out my guide to cosmetic emulsifiers for more information about the various emulsifiers.)
Olivem 1000 is another natural emulsifier that is considered non-comedogenic. It’s an emulsifier derived from the olive plant that also makes a nice creamy lotion. While I haven’t tried it in this specific recipe, I have used in many other homemade lotions like the anti-stress and headache lotion posted on the blog.
Some people say that Olivem is a more difficult emulsifier to use. Others think it has a soapy feel to it in lotions. While I don’t have issues with Olivem, both of those issues can be resolved somewhat by combining it with a co-emulsifier like cetyl alcohol or cetearyl alcohol. (I’ve also read that Olivem may cause problems when over-beaten. If you think you have that issue, either hand-mix it or blend in short bursts during the cooling phase.)
Natural Preservatives
For this recipe, I originally chose Leucidal because it’s a fairly accesible natural preservative both in Spain and in the United States. Leucidal comes from fermenting radishes with a bacteria called Leuconostoc Kimchii. Using it as 3-4% of your recipe by weight allows you to keep your finished lotion for 2-3 months (outside of the fridge) provided that you have made the lotion in hygienic conditions.
I have since switched to using other preservatives instead. Lately, I’ve been making it with either Sharomix 705 or Euxyl® K 903. Both are allowed in natural and organic cosmetics. Most natural preservatives (other than Leucidal) are used at a dosage of around 1% of the recipe, by weight. That means that you’d add 1g of preservative for every 100g of cream (99g other ingredients).
There are several other natural preservatives that you can use. Check out my guide to natural preservatives for more preservatives that can be used and how to safely substitute them in recipes.
I also cover more about preservatives and emulsions in my post about how to make a basic lotion. If you haven’t made lotions or creams before, it’s a good idea to read through that post to give you a better idea of the process. (Don’t worry, it’s easy!)

Using essential oils
This is one of the few times that I haven’t added essential oils to one of my homemade lotions. That doesn’t mean that you can’t add them, though. I mostly didn’t add them because I loved the rose scent of this lotion obtained from using rose water. (This could be made more potent by adding some rose essential oil!)
If you want to try to help increase the acne-fighting benefits of this homemade moisturizer, though, tea tree oil is probably the best essential oil for treating acne. Not only is it gentle enough to be well tolerated by most people, but it has also been shown to have antimicrobial properties, which may very well help clear up acne.
Lavender essential oil is often used in skin treatments for acne-prone skin and it effectively helps clear up the skin of some people. Plus, it has a lovely fragrance!
Some people may find that they are sensitive to essential oils, and their use may cause redness, making the problem worse. If you have sensitive skin, it may be a good idea to divide your batch of moisturizer and only add essential oils to a small amount to test out before adding them to an entire batch.
When adding essential oils, I normally add them at around 1% of the product, by weight. (So, 1g for every 100g of product.)
How to make the moisturizer
To make the moisturizer, you first need to weigh out the various ingredients. The oil-based ingredients should be combined in a heat-safe container and the water-based ingredients should be combined in a separate heat-safe container.
I find it easiest weigh out all of the oil-based ingredients together and all of the water-based ingredients together. To do so, tare the scale with the empty container on it. Add the first ingredient, up to the correct weight. Tare the scale between ingredients to get the reading back to zero again.
The emulsifier will normally be added to the oil-based ingredients. (Check on the instructions that come with your particular emulsifier to make sure.)
For those who will be making their own soaps and other cosmetics, having at least one scale is essential. You can buy an inexpensive kitchen scale for under $20. A kitchen scale is great for recipes where you don’t need to be super precise. It will give you a reading to the nearest gram.
More precise measurements may be needed for making smaller batches. (For example, when measuring out preservatives or when making a homemade serum.) I use an inexpensive jeweler’s scale for those times.
Weigh out the ingredients. Combine the emulsifier with the oils. Heat both containers over water bath. Melt the emulsifier and butter.
Once you’ve weighed out the various ingredients, heat both the oils and the waters in a water bath until the emulsifier has melted.
Once the emulsifier has melted, remove both containers from the hot water bath. Immediately pour the oil-based ingredients into the water-based ingredients while warm. Ideally, they should both be around 70º-75ºC/160º-170ºF.
Pour warm oils into warm waters. Blend together with a blender or milk frother.
Periodically blend the ingredients together with an immersion blender or a milk frother while the mixture cools. You can also whisk by hand, but an electric mixer can help ensure a more stable emulsion. The moisturizer will thicken as it cools.
Once the ingredients have cooled enough, add the preservative and any other heat-sensitive ingredients that you may want to add. (This includes essential oils and/or vitamins like b-panthenol.)
Then, pour the mixture into clean packaging. I like using airless dispensers and silicone travel tubes because they allow you to dispense the moisturizer without contaminating it with your hands.
Day cream or night cream?
This moisturizer works well both day and night. It’s not too heavy and it includes several oils with anti-aging properties.
Normally, the main difference between day and night creams is that night creams often use photosensitive ingredients that can’t be used in day creams. They are also sometimes a bit heavier and greasier than a cream that you would want to wear in the day under your makeup.
This cream doesn’t have any photosensitive ingredients (unless you were to add a citrus essential oil or some other additive that may increase sun sensitivity), so it’s perfectly fine to use both night and day. Perhaps as I get older, though unnecessary, I may try making a separate night cream that is slightly heavier.
Video

Homemade Moisturizer for Oily, Acne Prone Skin
Materials
- 10 g sunflower oil not high oleic
- 5 g argan oil
- 5 g hemp seed oil
- 5 g shea butter
- 5 g rosehip oil
- 40 g distilled water
- 25 g rose water
- 5 g montanov 68 or olivem or other emulsifier
- 1 g natural preservative (follow the recommended dosage for preservative chosen)
Instructions
- Weigh out the distilled water and rose water in a heat-safe container.
- Weigh the oils and emulsifier in a separate heat-safe container.
- Heat both containers in a hot water bath until the emulsifier has melted. (You may also use double boiler inserts for heating the ingredients over the hot water.)
- Combine the hot oils and waters while still hot, stirring until well combined. Ideally, both should be around 70º-75ºC/160º-170ºF when you combine them.
- Periodically whisk the ingredients together while they cool. The mixture will thicken and become more opaque as it cools.
- Once the mixture has cooled to around 30ºC/85ºF, add the preservative and, optionally, essential oils or other heat-sensitive ingredients. Mix together well to incorporate all of the ingredients.
- Test the pH of the lotion. Adjust it down with a few drops of lactic acid, if needed.
- Pour the facial cream into bottles. I love airless dispensers because they allow you to dispense the cream easily without contaminating it with your fingers.
Notes
Customizing oils
You may adjust the amounts and combination of oils used to suit your skin and sensitivities. (Just keep the total weight of the oils the same.Adding fragrance
This moisturizer obtains its subtle floral scent from the rose water. If you want a more pronounced rose scent, you can substitute part of the distilled water for more rose water or add a few drops of rose essential oil. If you prefer, you can also substitute the rose water with another floral water or hydrosol. You can also add an essential oil like lavender or tea tree oil at around 1% of the recipe by weight. Some essential oils may also help prevent and clear up acne.Preservatives
I normally use Sharomix 705 and Euxyl k903 to preserve this moisturizer. If using Leucidal for your preservative, it should be dosed around 3-4% of the recipe by weight (rather than 1%). For more information about preservatives, check out my guide to natural preservatives.Emulsifiers
Different emulsifiers will give different consistencies and textures. You may need to adjust the amount of emulsifier used depending on the one chosen. (Adding more will give a thicker consistency.) For more information about emulsifiers, check out my guide to emulsifiers. I like Montanov 68 and Olivem 1000.Testing the pH
You can use ph test strips to test the pH of the lotion. Test the pH to ensure the lotion falls in a decent range for both your skin (5-6 is ideal) and for the preservative you want to useYield
This recipe makes around 100g of lotion. In volume, it will make slightly less than 100ml. (The oil component of ml to grams isn’t interchangeable in the same way water is.) You can adjust the amount of the recipe to suit whichever container you plan to use.This post was originally published on April 8, 2017. It was rewritten, adding new photos, video, and clearer instructions in April of 2021.
Omowunmi
This is a great article. Thank you.
Tracy Ariza, DDS
Thanks! 😊
I’m actually in the process of updating it- and will be republishing it with new information either tomorrow or this weekend!
Olivia
Hi, can I substitute some oils? I have sweet almond oil and jojoba oil. Could I use those instead? I don’t really have oily / acne skin, I just want to make an everyday moisturizer. Which oils could I replace?
Tracy Ariza, DDS
Hi Olivia,
Yes, that’s fine. You can substitute whichever ones you want and use the ones you have. Just keep the total amount of oil the same to get a similar final texture.
isa
Hi Tracy, would I be able to add this product to this moisturiser? https://theordinary.deciem.com/gb/rdn-100pct-l-ascorbic-acid-powder-20g.html
Tracy Ariza, DDS
Hi Isa,
Yes, that should be fine, but I’d do it as they suggest in their instructions. They say “Mix a small amount with other treatments in the palm of your hand and apply to face in the AM or the PM.” the idea is to add a tiny bit of powder to a dollop of the moisturizer in your hand until the powder is dissolved. You can then apply it to your face.
I think the reasoning for that is because ascorbic acid isn’t stable once it’s dissolved. If you were to mix it into the entire batch of moisturizer, after a few days, it would no longer be effective.
Reyna Brown
Can you use beeswax as the emulsifier?
Thank you!
Tracy Ariza, DDS
Hello Reyna,
No, I’m afraid that beeswax isn’t a true emulsifier. You have to do a lot to get it to work as an emulsifier, and then it doesn’t create a stable emulsion. I’m working on a post about emulsifiers now. Hopefully, I’ll be able to post it this week.
Danica
hi, for some reason my cream isn’t thickening:( what do I do?
Tracy Ariza, DDS
Hi Danica,
Sometimes it can take several hours for it to thicken. Has it thickened by now? I’ve had batches that were on the thinner side that were quite thick the next day.
If not, which emulsifier did you use? If you switched out the emulsifier, that can make a huge difference. Some may need larger amounts to give the same consistency as the one I used.
Kinsey
Hi, Tracy,
I really love your informative website. I just have one question for this receipe. I found that the hemp seed oil needs to be refrigerated after opening. Do I need to refrige the lotion?
Thanks,
Kinsey
Tracy Ariza, DDS
Hi Kinsey,
Thank you so much!
No, it’s not really necessary. Ideally, you should be using the lotion within a few months anyway, so it should be fine. I’ve never had any problems with it smelling off- like it had gone rancid.
The problem with hemp oil is that it isn’t as stable as oils like olive oil or coconut oil. So, they recommend the fridge to keep them from going rancid too quickly. In a lotion, if it did go rancid, it’s more of an issue of having an unpleasant scent rather than anything else- so if you did find that it starts to smell off- it’s probably time for a new batch.
It should keep long enough to use a small batch, though. I remake every few months. It’s a quick recipe, once you get the hang of it- and I like to batch make with other lotions and hair conditioner.
Kimberly Johnson
How much of each ingredient did you use?
Tracy Ariza, DDS
Hi Kimberly,
If you scroll down, you should see a recipe card with the full recipe. There is also a “jump to tutorial” button at the top of the post that should take you directly there.
Robbin Black
What are recommendations for temperatures reading for your water and oils solutions?
Tracy Ariza, DDS
Hi Robbin,
somewhere around 70º-75ºC/160º-170ºF is a good range for both to be when you combine them.
Lisa Hill
Nice article! I have acne prone skin and I want to treat it by following your article. Thanks and keep sharing.
Tracy Ariza, DDS
Hi Lisa,
I wish you the best of luck with it!
Shalini Sharma
Is there are any side effects of this?
I just want to be sure before using.
Tracy Ariza, DDS
Hi Shalini,
Generally, no, but obviously, if you are sensitive to any of the ingredients, it could cause issues for you.
Jennifer
Can zinc oxide or salicylic acid be added to this recipe? If so, in what amounts would you recommend? I have small acne breakouts and learned that these products can help with this problem (and the minor scarring). Thanks!
Tracy Ariza, DDS
Hi Jennifer,
Yes, you should be able to add either one to the recipe. I’m not sure how much zinc oxide you’d want to add. Too much, and you’ll obviously end up with quite a white powder.
I think the salicylic acid would need to be added to the water phase when mixing. (It may need to be dissolved in something else, though. You’d have to check the instructions that come with whatever formulation you use.)
The other concern would be to check the final pH of the product to make sure you are still in an effective range for whatever preservative you are using. (If you go below a pH of 4, though, you end up in a range where most preservatives don’t work, but most microbes don’t grow either, so…)
(I have more information about that in my post about natural preservatives.)