Dr. Bronner’s soap is a versatile, all purpose cleaner that is a great addition to any household. But let’s face it, it’s can be quite expensive. Learn how to make a multipurpose liquid Castile soap at home. It’s easy, frugal, and very rewarding.

If you’ve been following my blog for a while, you know by now that I love making soap.
Making bars of soap is a lot of fun, and you can experiment with all sorts of ingredients, colors, and other additives to customize your soap exactly as you like. If you’ve never made a bar soap before, take a look at my easy, beginner soap recipe, which shows you exactly how to start making bar soaps and also gives you ideas for customizing the soap to suit your needs. That beginner soap recipe is a modified Castile soap recipe, just like this one.
What is Castile soap?
I call this recipe a modified liquid castile soap recipe because it uses a variety of vegetable oils. Pure Castile soap normally refers to a soap made with only olive oil.
Over the years, the definition of “Castile soap” has been extended to include other soaps made with not only olive oil, but that also add in other vegetable oils. Other vegetable oils are added to change the properties of the soap, normally to give it more lather and make it more cleansing.
Soaps made with only olive oil are on the conditioning side, meaning that they are mild, and not stripping, when used on skin. On the other hand, they don’t form as much lather and aren’t considered highly cleansing soaps.
Coconut oil in soap makes a nice lather and is very cleansing, but it can be drying on the skin when used alone.
Combining a variety of oils allows you to add the beneficial properties of each oil in the soap, making a soap that can be ideal for a number of uses.
Why make your own liquid soap?
While it is fun to make bar soaps, I find it more rewarding to make liquid soaps at home.
Let’s face it, Dr. Bronner’s Liquid Castile soap is a very handy soap to have on hand, but it can be pretty pricey. By making your own liquid Castile soap at home, you can save yourself a lot of money. (And it’s actually pretty easy to do too!)
What’s in Dr. Bronner’s Liquid Castile Soap?
Despite the fact that they call it a “pure Castile soap,” it isn’t a soap made only with olive oil. In fact, coconut oil is the main ingredient of the Dr. Bronner’s soap that I tried to copycat (and of all the Dr. Bronner’s soaps that I can find here.)
I chose to try to make a soap similar to the Dr. Bronner’s 18-in-one Hemp Baby Unscented Pure Castile Soap. One of the reasons I chose that particular soap is that it is unscented, and it allows for me to see if my homemade liquid Castile soap has a similar natural scent. (I’ve noticed that my homemade liquid coconut oil soap and my homemade pure liquid Castile soap don’t have the same scent. Both have a mild natural soap scent, but my coconut oil soap smells a lot more like the Dr. Bronner’s soap than my soap made with olive oil.
Interestingly enough, I’m seeing that the version sold on Amazon in the US appears to be different from the bottle I bought at a local shop here in Spain.
Here in Spain palm kernel oil wasn’t listed at all, but in the US it is the oil that is used in the highest concentration after the coconut oil.
In the US, the soap has this ingredient list: Water, Organic Coconut Oil, Potassium Hydroxide, Organic Palm Kernel Oil, Organic Olive Oil, Organic Hemp Oil, Organic Jojoba Oil, Citric Acid, Tocopherol
You’ll notice that the main oil used is coconut oil, and that all of the other oils are used in a lesser quantity than even the lye itself. (In the case of liquid soaps, potassium hydroxide is the lye used.)
When I made my copycat liquid Castile soap, I didn’t use palm kernel oil because I was trying to copy the bottle of soap that I had at home. I had no idea that they made different formulations of their soap here in Europe.

I tried to make my recipe as similar to theirs as possible, so I used coconut oil as the base oil for my liquid Castile soap recipe, and used the other oils in descending order, using a smaller amount of those oils than the potassium hydroxide just like theirs.
The last two ingredients in Dr. Bronner’s soap are citric acid and tocopherol. Citric acid is likely used to neutralize the soap to keep it on the mild side. (You can read more about that in the section below about superfatting.)
Tocopherol is a form of vitamin E. It is often added to soaps to help extend the life of the soaps as it can help keep any excess oils from going rancid. In the case of liquid soaps that aren’t normally superfatted, it probably doesn’t help as much in this way, but it still may somehow help extend the shelf life somewhat. (Keep in mind that while the antioxidant properties of vitamin E can help extend an oil’s shelf life, Vitamin E is NOT a preservative, and won’t prevent bacterial or mold growth.) Still, vitamin E is a nice addition to any beauty product that will be used on face and body as it helps add moisture and can help soothe skin. You can most definitely add a few drops of vitamin E to your homemade liquid soap when you dilute it to help gain some of its positive benefits when using your liquid soap.
Differences between oils in liquid soap
When I first started making liquid Castile soap, I made the pure Castile soap with only olive oil as often as I made a liquid soap using coconut oil. I figured that for face and body use, the pure liquid Castile soap would be a lot better to use because soaps made with olive oil are milder and more conditioning than soaps made with coconut oil.
I wanted versatility, though, so I was making batches of both types of liquid soap to later combine them dependent on each particular use. The nice thing about liquid soaps is that you can combine the soaps after having made them. I used a mixture of different liquid soaps, using mostly olive oil soap for general bathing and mostly coconut oil for cleaning around the house.
Since then, though, I’ve found that I use my homemade liquid soap made with coconut oil much more than I use the liquid Castile soap made with only olive oil. I even occasionally use it 100% in the shower, and don’t find it to be drying on the skin. I think part of that may have to do with me using the glycerin method of liquid soap making. I use glycerin as part of the water component of the soap. I do it to help make an easier to use soap, but I think the extra glycerin (all soaps have glycerin in them that is made during the soap making process) likely helps prevent drying and makes a more conditioning soap.
Despite its popularity here on the blog (more than twice as many people check out the olive oil liquid Castile soap recipe over the coconut oil liquid soap), I have to admit that I rarely make that recipe anymore. I find myself often making double batches of the liquid coconut oil soap, though. I think people are so used to seeing “liquid Castile soap” for sale, and assume that the olive oil soap, being called “Castile soap,” will be closest to what they would normally buy.
That’s part of the reason that I decided to come up with another recipe that would be a nice, versatile, all-purpose cleanser like Dr. Bronner’s liquid Castile soap. This new recipe would combine coconut oil and olive oil, along with a couple of other oils, to make one batch of all-purpose liquid Castile soap. Some people had no desire to make two different batches of liquid soap, and I totally understand! Don’t get me wrong; either of the other recipes is pretty multi-purpose as well, but this one allows you to make just one batch and use it for pretty much anywhere you’d want to use liquid soap.
This soap compare vs. Dr. Bronner’s Unscented Baby Mild Liquid Castile soap
Scent comparison
While this soap had a similar scent, Dr. Bronner’s has a natural fragrance somewhere between this soap and that of my coconut oil liquid soap. I think my soap smells a bit more like hemp oil than Dr. Bronner’s version, which makes me think that I used higher concentrations of hemp and jojoba oils than Dr. Bronner’s does. (This, of course, is all guesswork on my part!)
Seeing as how hemp oil and jojoba oils are the more expensive oils in those recipe, that would make a lot of sense. To save even more money, you could definitely reduce those oils in this recipe, but you’d have to run the new formula through a lye calculator first to make sure that you use the right amount of potassium hydroxide. When formulating liquid soap recipes, I usually use the Summer Bee Meadow lye calculator, as I’ve often read that it’s the best calculator for liquid soap making. Not only does it take into account the water component in KOH vs. NaOH, but it also allows for calculating in glycerin and alcohol should you choose to use them.

Color comparison
My diluted soap is slightly lighter in color than my bottle of Dr. Bronner’s. Dr. Bronner’s soap is closer in color to my liquid soap paste. That likely means that their soap is a bit more concentrated than the soap I diluted to use as a hand soap. That makes sense when you consider that Dr. Bronner’s soap is marketed as being very concentrated, and most people dilute it further before using it. If I were to dilute my liquid soap paste with less water, I’d likely be able to make a liquid soap of the same color as theirs.
I would like to say that I’ve also had the bottle of Dr. Bronner’s soap for longer than my homemade liquid Castile soap. I’ve found that my liquid soap pastes tend to get slightly darker with time, so that could be another factor that affects the difference in color.
Use comparison
When using them, both soaps lather up nicely, and neither is drying on the skin. I don’t really notice any differences while using them.
Why use Glycerin (When Dr. Bronner’s doesn’t list it)?
Adding glycerin does add to the cost of making your own liquid Castile soap, but it does have several added benefits.
When I first started developing liquid soap recipes, I remember reading about people who replaced all of the water in the recipe with glycerin. The idea was that it makes the process more fool proof and speeds up the process of making a clear liquid soap.
I wanted to make the process of making liquid soap at home the easiest I could, so I chose to substitute part of the water component for glycerin. I’ve found that not only does it help move the process along quickly, converting the soap quickly into a liquid soap paste, but it also seems to make a very nice, mild liquid soap, even when only using coconut oil. When you take into consideration that liquid soaps aren’t normally superfatted, that’s saying a lot.
When making a homemade glycerin bar soap, I learned how glycerin can be a solvent of sorts that helps make a more transparent soap. My guess is that the addition of glycerin to my liquid soap helps to make it a bit more transparent even when I don’t use excess lye in the recipe.
I also think that the addition of glycerin helps make a liquid soap paste that easily dissolves in water. I’ve read horror stories from people who have a difficult time trying to dilute their soap paste in water. On the other hand, I’ve always easily dissolved mine just by adding some water to it and leaving it alone for a few hours.
What is superfatting?
Superfatting is the process of adding more oils to a soap than what are needed to react with all of the lye used. The idea is that not only will all of the lye be safely converted into soap, but that leftover oils also remain in the soap to help leave the skin conditioned and soft.
While most bar soaps are superfatted, especially those meant for face and body, leftover oils in a liquid soap can cause cloudiness. Because most people are aiming to make a transparent liquid soap like the ones sold in stores, liquid soaps aren’t normally superfatted. In fact, they are normally made with a lye excess and later “neutralized” to bring down the pH from the unreacted lye. You can read more about how to check the pH of soap and how to neutralize liquid soaps here. (The term neutralizing is a bit misleading as it will only bring the pH down slightly to a non-irritating range. You won’t be bringing the soap to a neutral pH. It will still be alkaline.)
You’ll notice that Dr. Bronner’s liquid soap lists citric acid as one of the ingredients. My best guess is that they are using the citric acid to help neutralize their soap so that the pH isn’t too high and doesn’t irritate your skin, all while allowing for a nice, clear, transparent soap.
To simplify things, I’ve calculated all of my liquid soap recipes to be 0% superfatted. Basically that means that if the recipe is followed precisely, you shouldn’t have any unreacted oil or any unreacted lye left.That said, it’s very possible that even if you follow the recipe precisely with a well calibrated scale, that you may have the tiniest bit of one or the other leftover, but it shouldn’t be enough to throw things far enough in either direction to make a big difference. If the soap is slightly cloudy, you may have some unreacted oils, but that will also make for a more conditioning soap. I personally don’t have a problem with cloudy liquid soap, but if it bothers you, you can try making with a lye excess and neutralize the soap later. Or you could go the easy route and use an opaque soap dispenser. (There are some beautiful stainless steel and ceramic ones available.) 😉
If you do end up with some unreacted lye, as long as it isn’t enough to bring the pH high enough so that it irritates the skin, it shouldn’t be a problem. If you find the soap irritating to your skin, though, you can check the pH and try neutralizing the soap. Up until now, I’ve never had an issue with any of my homemade liquid soaps using the recipes I’ve shared with you.
Video
Dr. Bronner’s Unscented Baby-Mild Copycat (Updated Recipe)
When I originally posted this recipe, I used larger quantities of the hemp and jojoba oils. Not only does this make the recipe more expensive to make, but I also found that it made for a cloudier soap.
I had a reader comment to me that she had made all of my liquid soap recipes, and that while the others were crystal clear, this one stayed cloudy for her. Mine was cloudy at first, but then an opaque layer settled out and fell to the bottom of the jar. Neither of us found it to affect the quality of the soap, but I didn’t really find it to improve the soap either. I decided to give you an updated version of the soap, with reduced quantities of the more expensive oils. I’ve found this updated version to much clearer, and I think it behaves similarly to the soap I bought in the store.
For those who want a soap without the hemp and jojoba oils, try the last recipe on this page. I’m guessing it’s perfectly clear and cheaper to make. I’m not convinced that the hemp and jojoba oils are providing any benefit in this soap anyway. (They are likely added for label appeal.)

Dr. Bronner’s Unscented Baby-Mild Copycat (Updated)
Materials
- 28 oz. coconut oil
- 8 oz olive oil
- 1 oz hemp oil
- .5 oz jojoba oil
- 9.4 oz KOH
- 20.2 oz distilled water
- 8 oz glycerin
Instructions
- Weigh out all of the oils and add them to a slow cooker on low heat.
- Weigh out and mix together the distilled water and glycerin.
- Dissolve the Potassium hydroxide (KOH) in the distilled water and glycerin mixture in a well ventilated area. Add the KOH to the water and not the other way around. Use gloves and safety goggles when working with potassium hydroxide. the mixture will heat up and get hot. Avoid inhaling the fumes.
- Add the potassium hydroxide solution to the oils in the slow cooker and begin to slowly mix them together.
- Use an immersion blender to blend the oils and potassium hydroxide solution together. At first it will get opaque and thicken slightly, then it will look curdled. Keep blending!
- Continue blending until it gets more opaque and begins to get too thick to blend with the immersion blender. I stopped blending as soon as I felt too much resistance so as not to burn out the blender, and my soap paste turned more solid almost immediately after I stopped.
- Continue to heat the paste, stirring as best you can with a spatula or spoon every half an hour or so. You want to continue to cook the soap paste until it becomes translucent. A good way to check what your final soap should look like is to dissolve a small amount in some distilled water and see if it dissolves clear. If not, continue to process a little longer. You’ll probably end up cooking the paste for a few hours.
- Once processed, you can store the soap paste in glass jars in a cool, dark place until you are ready to dilute it to make your liquid Castile soap.
- Depending upon how concentrated you want your soap, dissolve the soap paste in distilled water. I usually use somewhere between 2-4 parts water for every 1 part of soap paste. I dissolve small amounts at a time and leave the rest as a soap paste until I need to use it. The soap paste will keep for longer than diluted liquid soap.
- You can now add in any essential oils that you want to use to add a fragrance to your soap, or you can keep in unscented. You can also add in a few drops of tocopherol (vitamin E) at this time.
- Enjoy using your homemade liquid Castile soap.
Notes
- This recipe makes 4-4.5 lbs. of soap paste which can be diluted to 10-20 lbs. of liquid soap, or 1-2 gallons, depending on your dilution rate.
- Keep in mind that liquid soap is not as thick as commercial gels and surfactants. You’ll find that this soap, like Dr. Bronner’s, doesn’t need to look thick to be a concentrated, effective cleanser.
- Find more information about diluting your liquid soap paste here.
- Read more about checking the pH and neutralizing liquid soap here.
Dr. Bronner’s Copycat soap recipe (Original version)
This was my original recipe for this post

Version 1: Dr. Bronner’s Copycat
Ingredients
- 25 oz. coconut oil
- 8 oz olive oil
- 5 oz hemp oil
- 3 oz jojoba oil
- 9.68 oz KOH
- 21.05 oz distilled water
- 8 oz glycerin
Instructions
- Weigh out all of the oils and add them to a slow cooker on low heat.
- Weigh out and mix together the distilled water and glycerin.
- Dissolve the Potassium hydroxide (KOH) in the distilled water and glycerin mixture in a well ventilated area. Add the KOH to the water and not the other way around. Use gloves and safety goggles when working with potassium hydroxide. the mixture will heat up and get hot. Avoid inhaling the fumes.
- Add the potassium hydroxide solution to the oils in the slow cooker and begin to slowly mix them together.
- Use an immersion blender to blend the oils and potassium hydroxide solution together. At first it will get opaque and thicken slightly, then it will look curdled. Keep blending!
- Continue blending until it gets more opaque and begins to get too thick to blend with the immersion blender. I stopped blending as soon as I felt too much resistance so as not to burn out the blender, and my soap paste turned more solid almost immediately after I stopped.
- Continue to heat the paste, stirring as best you can with a spatula or spoon every half an hour or so. You want to continue to cook the soap paste until it becomes translucent. A good way to check what your final soap should look like is to dissolve a small amount in some distilled water and see if it dissolves clear. If not, continue to process a little longer. You’ll probably end up cooking the paste for a few hours.
- Once processed, you can store the soap paste in glass jars in a cool, dark place until you are ready to dilute it to make your liquid Castile soap.
- Depending upon how concentrated you want your soap, dissolve the soap paste in distilled water. I usually use somewhere between 2-4 parts water for every 1 part of soap paste. I dissolve small amounts at a time and leave the rest as a soap paste until I need to use it. The soap paste will keep for longer than diluted liquid soap.
- You can now add in any essential oils that you want to use to add a fragrance to your soap, or you can keep in unscented. You can also add in a few drops of tocopherol (vitamin E) at this time.
- Enjoy using your homemade liquid Castile soap.
Notes
- This recipe makes 4-4.5 lbs. of soap paste which can be diluted to 10-20 lbs. of liquid soap, or 1-2 gallons, depending on your dilution rate.
- Keep in mind that liquid soap is not as thick as commercial gels and surfactants. You’ll find that this soap, like Dr. Bronner’s, doesn’t need to look thick to be a concentrated, effective cleanser.
- Find more information about diluting your liquid soap paste here.
- Read more about checking the pH and neutralizing liquid soap here.
Don’t want to use hemp and jojoba oils at all?…
Multipurpose Liquid Castile Soap (Coconut + Olive Oil)
Some people have been asking me for a soap without hemp and jojoba, so I decided to calculate it out for you. I haven’t personally tried this recipe myself yet, but I imagine it would make a wonderful soap.

Multipurpose Liquid Castile Soap
Ingredients
Instructions
- Weigh out all of the oils and add them to a slow cooker on low heat.
- Weigh out and mix together the distilled water and glycerin.
- Dissolve the Potassium hydroxide (KOH) in the distilled water and glycerin mixture in a well ventilated area. Add the KOH to the water and not the other way around. Use gloves and safety goggles when working with potassium hydroxide. the mixture will heat up and get hot. Avoid inhaling the fumes.
- Add the potassium hydroxide solution to the oils in the slow cooker and begin to slowly mix them together.
- Use an immersion blender to blend the oils and potassium hydroxide solution together. At first it will get opaque and thicken slightly, then it will look curdled. Keep blending!
- Continue blending until it gets more opaque and begins to get too thick to blend with the immersion blender. I stopped blending as soon as I felt too much resistance so as not to burn out the blender, and my soap paste turned more solid almost immediately after I stopped.
- Continue to heat the paste, stirring as best you can with a spatula or spoon every half an hour or so. You want to continue to cook the soap paste until it becomes translucent. A good way to check what your final soap should look like is to dissolve a small amount in some distilled water and see if it dissolves clear. If not, continue to process a little longer. You’ll probably end up cooking the paste for a few hours.
- Once processed, you can store the soap paste in glass jars in a cool, dark place until you are ready to dilute it to make your liquid Castile soap.
- Depending upon how concentrated you want your soap, dissolve the soap paste in distilled water. I usually use somewhere between 2-4 parts water for every 1 part of soap paste. I dissolve small amounts at a time and leave the rest as a soap paste until I need to use it. The soap paste will keep for longer than diluted liquid soap.
- You can now add in any essential oils that you want to use to add a fragrance to your soap, or you can keep in unscented. You can also add in a few drops of tocopherol (vitamin E) at this time.
- Enjoy using your homemade liquid Castile soap.
Notes
- This recipe makes around 5.5 lbs. of soap paste which can be diluted to 12-25 lbs. of liquid soap, or around 2 gallons, depending on your dilution rate.
- Keep in mind that liquid soap is not as thick as commercial gels and surfactants. You’ll find that this soap, like Dr. Bronner’s, doesn’t need to look thick to be a concentrated, effective cleanser.
- Find more information about diluting your liquid soap paste here.
- Read more about checking the pH and neutralizing liquid soap here.
Gina Wilkins
Weird question. Coconut oil – is this fractionated or the semi sold form? Thanks!
Tracy Ariza, DDS
Use the one that solidifies when it cools. Fractionated needs a different amount of lye!
Lykketone
Hi! This looks exciting! 😃 But I don’t have a crockpot…🙈 Can I make it in another way? What happens if I skip the glycerin? I have made CP soaps but never liquid soap. Yet… 😎
Tracy Ariza, DDS
Hello,
I cover mist of these questions in my “start here guide to making liquid soap post.”
Shirt answer, though…the oven can work, and the glycerin speeds up the process and makes it more foolproof. But you can sub it for more water. The final soap will be slightly different and may be more difficult to dilute.
Shannon
I’m so sorry if this has neen asked before. Referring to the multipurpose recipe with the olive and coconut oils, how do you dilute it to a similar concentration of Dr Bronners? And will it use similar second dilution rates as Dr Bronners for the various uses?
Tracy Ariza, DDS
Hi Shannon,
It’s really impossible to know what dilution rate they have used. I’m also only guessing at the ratios of the oils, albeit an educated guess based on the order of their ingredient list and the scent of their soap, etc.
In the end, it really just comes down to experimentation. Theirs is marked as concentrated, but is quite liquidy, which is common for a natural liquid soap that hasn’t been thickened with other agents. I’d guess that theirs has a ratio of about one part paste to 3-4 parts water, but that’s just a guess, of course.
Kelly
This is the third time I have made the updated version of this soap, and the previous two times it turned out well. However, this time after going into the “mashed potato” phase, and a couple stirs, it became totally liquid! So, weird. As I tried to figure out what could cause this deviation from what I expected, I tried to find some ideas from your troubleshooting tips and noticed that you advised someone that using pomace would have a different affect. . . and I realized that with this batch I DID use pomace. Plus, I subbed out the jojoba oil for castor oil (didn’t have jojoba on hand). After now 2.5 hours of cooking, it’s still very fluid–no “paste” in sight. What do you suggest?
Tracy Ariza, DDS
Sorry I had gotten way behind on comments and have been catching up on hundreds of them that accumulated while I took a break!
Subbing oils can also make a huge difference in the outcome. Off the top of my head, I don’t know how those changes affect the recipe. I’d have to run it through a lye calculator. (I’m on vacation and without my computer, so I can’t easily do that right now.)
I’d suggest reading my posts on oils in soapmaking and how to use a lye calculator to help understand what went wrong and how to adjust recipes if you need to.
Peter
Hi Tracy!
I made the castile soap with just coconut and olive oil as per your recipe and it turned out amazing! I did run your recipe through SoapCalc but it doesn’t give me the same quantity of water. It gives me less. How do I know how much water and glycerin to put (in case I want to try other ratios of coconut and olive oil).
I dissolved the soap in distilled water, 1:1 ratio, and though it was a bit of headache to dissolve, it gave me clear, yellowish solution of castile soap.
Lathers very nicely, and cleans so well! I already tried it as body wash, hand wash and dish soap.
Thank you!
Tracy Ariza, DDS
Hi Peter,
I always used to use SBM Crafters advanced lye calculator for my liquid soap recipes and it gave the option of adding glycerin, etc. (I explain it more in detail in my post about using a lye calculator.) Sadly, though, theirs seems to be down recently so I’ll have to find a new alternative that I like. Some people only use glycerin, but I find that to be a waste and overkill, so I just use a smaller amount. I find that using glycerin helps move the recipe along more quickly and also helps it dissolve easier, so I’m sad to hear that yours wasn’t quick to dissolve. You can add warm water to speed up the process! I’m glad it worked out otherwise!
Brittney Henderson
If you wanted to add an additional preservative at the dilution stage, which would be good one to use? I would like to make this recipe to use as gifts, and they may sit at their new homes for prolonged periods of time. I’m just wanting to be extra cautious!
Tracy Ariza, DDS
Hi Brittney!
I think the best option is probably Eukyl K900. It’s the only preservative I’ve seen recommended for the high pH of liquid soaps. (PH of 3-12.)
Nichole
Hi,
I was making your recipe and when I finally got to the thick taffy phase it turned back into a liquid. What did I do wrong?
Tracy Ariza, DDS
Hi Nichole,
To be honest, I have no idea as that has never happened to me. That said, I’d just go with it and try to dilute it with water and see what you end up with.
David Alexander
I’m excited to try this recipe. Is olive pomace a reasonable substitute for normal or EV olive oil? I’d read there may be chemical traces from extraction. I’m curious if you’ve tried it w/ this recipe to get the same Bronner result. Thanks!
Tracy Ariza, DDS
Hi David,
No, pomace is different and has a different saponification rating on a lye calculator.
I’ve never tried using pomace as we have cheap decent olive oils here in Spain and pomace just isn’t commonly seen.
If you did want to try with pomace, run it through the lye calculator first.
Francisca
Hi Tracy. Last week I made the liquid castile soap with your recipe. I cooked it over 16 hours in the instapot. I was doing the transparency test (to check if it was ready) with tap water and the water kept getting cloudy. Then, I made the test with distilled water and it was completely transparent. My soap turned much greener than yours. I figure it is because the different type of olive oil. I diluted everything with the 5 liter bottle of distilled water that I bought.
I have 2 questions.
1.- Conservation issue. I understand that you say that it is better to keep the paste and dissolve it as we use it and that the soap has a high pH so it does not need as much preservative. But at the same time you say that once dissolved, we should use it within 2 months. That´s a really short time. I would like to give away liquid soap as christmas presents, but it is complicated with such a short expiration date. How does Dr Bronner’s does it?
2.- Afterwards using the soap, my hands feel dry. Can I add almond oil to the soap to make it less drying? What would be the proper ratio?
Tracy Ariza, DDS
Hi Francisca,
I always give very low shelf lives, erring on the side of caution, as a precaution. I don’t want people having issues and then getting upset with me…or worse. 😉
It should keep much longer than that. I’ve had batches keep years. I generally use up the diluted within a couple of months because we use a lot of it, but I don’t date it or follow any particular time frame and have never had issues.
I’m guessing Dr. Bronners doesn’t add anything as I’ve never seen anything listed on their labels, not even here in Europe where the laws are stricter.
If you’re still concerned, Eukyl K900 works at the high pH of soap, so it’s an option.
Some of my soap pastes from years ago…mainly the mixed oil ones, are starting to smell a bit rancid, but otherwise are fine to use. I’ve mostly saved those for general cleaning as it’s not pleasant to have a rancid smelling body wash, even if you mask the scent with essential oils. It has never otherwise “gone bad”.
As for the oil, yes, you can add oils, but they will generally make the soap cloudier and will cut down slightly on the cleansing power of the soap. But, yes, it should be slightly gentler cleansing.
You may be sensitive to the high H of soap and may do better with another type of surfactant for your skin. One example I have up is my baby shampoo and body wash. I plan to put up more recipes soon!
J
I tried making the Version 1: Dr. Bronner’s Copycat and I get to a 9ph level, but the soap never completely gets translucent. There are only a few sections of the paste that looks translucent. Previously, I tried this recipe: 24 oz weight (680 grams) olive oil 16 oz weight (454 grams) coconut oil, 9.35 oz weight (265 grams) Potassium hydroxide lye flakes, 32 oz (4 cups | 907 grams) distilled water, for lye-solution, 10 to 12 cups distilled water. That was https://nwedible.com/how-to-make-diy-liquid-castile-soap/ your recipe was more successful and I will try the new version. I live at 2400 feet, in the foothills of California. Does elevation or humidity have a factor in soapmaking. Is there anyway to calculate the concentration of the product. When I add fragrances, some will congeal the soap, how do I fix that? I can use all the help I can get. Thank you.
Tracy Ariza, DDS
I would imagine that humidity would have more effect than altitude. I looked up the altitude effects and couldn’t find much information.
As for the congealing, I’m not sure. I’ve only used essential oils and never had issue with them. If anything, people complain that liquid soaps are too thin and would be happy to have it thicken with an added ingredient.
Mine came out transparent, other than a thin layer on the surface with the recipe with more of the other oils, so I’m not sure why you’d have another result.
I’d try making the coconut oil liquid soap and see how it turns out for you. That one is a bit more simple, so there’s less room for complications.